Directions for highspeed handpieces:
1. Fit Syntek spray can with appropriate nozzle with bur installed, spray into handpiece with 2 short bursts.
2. Run handpiece with bur still installed (never run handpiece with no bur) to expel any excess lubricant. Repeat if expelled lubricant is discolored.
3. Wipe down handpiece, remove bur and sterilize.
Directions for slowspeeds and attachments:
1. Spray Syntek for 2 seconds into drive air hole and run briefly.
2. Wipe down handpiece and sterilize.
